• One black four-slot holder with four PS5 cases stored horizontally, spines facing forward.
  • Two matching black holders stacked horizontally with eight PS5 game cases, four per holder.
  • The same four-case holder turned vertically, showing four upright PS5 cases and the black side panel.
  • Two black four-case holders placed side by side vertically, with eight cases in total.
  • Close-up of the empty black holder showing four horizontal lanes and front finger scoops.
  • Empty black four-slot holder turned onto its side for vertical case storage.
  • Empty black holder at an angle showing its enclosed side and rear panels and the actual printed finish.
  • Two horizontally stacked holders on a wooden surface with a controller in front for scale; games and controller not included.
  • Two black holders with eight PS5 cases on a desk and a controller used as a photo prop; holder pack only.
  • Four-case holder dimension guide: 17.8 cm wide, 13.9 cm deep and 8.2 cm high horizontally. Rotate for vertical storage. Games not included.
  • Bambu PLA Basic color options: Black, Gray, Jade White, Red, Blue, Bambu Green, Yellow, Orange, Purple and Pink. Approximate colors.
  • Original rotation video of the black four-slot PS5 game case holder with four cases stored horizontally.
1 12

Stackable PS5 Game Case Holder, 4 Slots, Horizontal or Vertical Storage

Stackable PS5 Game Case Holder, 4 Slots, Horizontal or Vertical Storage

$24.99 CAD
$24.99 CAD
Sale Sold out
Shipping calculated at checkout.
Color
Pack size
Production and shipping

Made to order in 2–6 business days. Delivery time is additional. Shipping services and prices are shown at checkout.

Shipping & returns
What is included?

The finished physical holder or pack selected above. Games, cartridges and other photo props are not included.

Need help with your order?

Unsure about fit, a game version, or custom artwork? Contact us before ordering.

Keep four PS5 game cases together in a compact holder that works two ways: lay it flat for horizontal storage or turn the same holder on its side for upright cases. Add a matching second holder to store eight cases, stacked horizontally or placed side by side vertically.

CHOOSE YOUR PACK
• 1 holder: 4 case slots — CA$24.99
• 2 holders: 8 case slots in total — CA$44.99
The two-pack includes two identical holders in the same selected color. Each holder has four slots in either orientation. Order quantity counts the selected pack.

WHAT YOU RECEIVE
Your selected pack of finished, physical, 3D-printed holders.
Games, game cases, controllers, turntables and other photo props are not included. This is a storage accessory, not a console stand, controller charger or digital STL file.

TWO WAYS TO DISPLAY
• Horizontal: four cases lie flat with their spines facing forward.
• Vertical: rotate the same holder onto its side to store four cases upright.
• Two-pack: stack horizontally for eight cases or place both holders side by side vertically.
The enclosed shell has a closed top, bottom and rear, individual case rails and front finger scoops. Matching horizontal holders rest together using built-in locating edges; the stack does not lock together for carrying. Unload and separate the holders before moving a stack. Use on a flat, stable shelf.

SIZE & CASE FIT
Approximate empty-holder dimensions in horizontal use (width × depth × height): 17.8 × 13.9 × 8.2 cm / 7.01 × 5.47 × 3.23 in.
Turned vertically: approximately 8.2 cm wide × 13.9 cm deep × 17.8 cm tall.
Two horizontally stacked holders: approximately 17.8 × 13.9 × 16.2 cm.
Design dimensions may vary slightly after printing. Allow space in front to insert and remove cases.
Designed around standard PS5 plastic game cases up to a nominal 170 × 135 × 15 mm envelope. The real photos show PS5 cases in both orientations. Oversized collector editions, boxed sets, protective sleeves and unusual replacement cases may not fit. Message us with measurements if unsure. Compatibility with other case formats is not promised.

MATERIAL & COLORS
Made in Canada using Bambu Lab PLA Basic filament.
Choose Black, Gray, Jade White, Red, Blue, Bambu Green, Yellow, Orange, Purple or Pink. Black is shown in the real product photos. The color guide shows approximate swatches; screen settings, lighting and filament batches can affect appearance.

FINISH & CARE
This is a 3D-printed product: visible layer lines, seams and small surface variations are normal. Product photos have AI-assisted exposure and white-balance adjustments. The rotation video shows original product footage, and the dimension card is an AI-assisted guide.
For indoor storage. Wipe gently with a soft cloth and keep away from high heat and direct sun in a hot vehicle.

PROCESSING & DELIVERY
Made to order in Ontario, Canada. Processing: 2–6 business days; delivery time is additional. Canada Post postage is calculated at checkout for your destination and selected available service. Your shipping charge is shown before purchase.

An independently designed accessory by FB Retro Games. Not affiliated with or endorsed by Sony or PlayStation. Brand names identify compatible game cases only.

View full details